Installing Fts-3 On A Roll Stand/Trolley - EDAN FTS-3 Service Manual

FTS-3 Fetal Telemetry System Service Manual
4.
Hang the wall mounting board on the hook of the outer wall mounting board and fix the connecting board
and the outer wall mounting board with one M3*6 pan head screw.
Wall
M3*20 pan head cap screw

3.4.3 Installing FTS-3 on a Roll Stand/Trolley

FTS-3 can also be used with MT-803.
1. Stick the Velcro fixing tape on the bottom of the base station.
Figure 2- 3
Figure 2- 4
- 11 -
Installation
Opposite press riveting M3 bolt
Outer wall mounting board
Press riveting SUS304hook