Chapter 5 System Configuration; Adjusting The Working Channel - EDAN FTS-3 Service Manual

FTS-3 Fetal Telemetry System Service Manual System Configuration

Chapter 5 System Configuration

The end users can not change the system configurations. As a service engineer, you need to
change these configurations for them after FTS-3 is installed and checked properly.
NOTE:
Restart the base station after changing the settings.

5.1 Adjusting the Working Channel

If the fetal heart sound is with interference or it cannot be played smoothly, the working channel
is probably interfered. Put all the transducers back in the docking slots and press the adjustment
button in back of the base station. The channel range is 1-14.
Restart the system when it enters the charging interface.
NOTE：
The working channel number used by a system cannot be duplicated with that used by a
device of the same type.
- 14 -