EDAN FTS-3 Service Manual page 38

FTS-3 Fetal Telemetry System Service Manual
1
No. Part
1 Upper Assembly
2 Power connecting line to indicative light board
3 Lower Assembly
4 Main board connecting line to indicative light board
(7) Disconnect the cables/wires to separate the two parts.
NOTE:
The interfaces of the connecting line are fixed with the melt adhesive. Please drop alchol
and remove the melt adhesive with a pair of pliers. And the remove the pull out the
connecting line.
2
Figure 10- 8
4
- 32 -
Disassembling FTS-3
3