Definitions And Symbols - EDAN FTS-3 Service Manual

FTS-3 Fetal Telemetry System Service Manual
6 The wireless transducers are IPX8 waterproof, but the base station should be kept
non-soaked and non-condensing. The system may be condensing during
transportation in high humidity or low temperature.
7 The use of accessories and cables other than those specified may result in increased
electromagnetic emissions or decreased electromagnetic immunity of the system.
8 This equipment generates uses and radiates radio-frequency energy, and if it is not
installed and used in accordance with its accompanying documentation, may cause
interference to radio communications.
9 When the battery is charged, used or stored, keep it away from objects or materials
with static electric charges.
10 If the terminals of the battery become dirty, wipe with a dry cloth before using the
battery.
11 The recommended charging temperature for the battery is between 0° C ~ +40° .
Please do not exceed the temperature range.
12 Batteries have life cycles. If the time that FTS-3 using battery becomes much shorter
than usual, the battery life is at an end. Please contact the manufacturer to replace
the battery with a new one of the same specification as the one provided or
recommended by the manufacturer.
13 Remove the battery in the base station and store it at a cool and dry environment if
the system is not used for a long time.
14 Please remove the battery out of the transducer at the end of their life. Please read
the user manual carefully when you install or remove the battery.

2.4 Definitions and Symbols

Non-ionizing electromagnetic radiation
Serial Number
Wireless Transducer Working Indicator
USB Port (Reserved)
Ethernet Port (Reserved)
Channel Adjustment
CAUTION
- 7 -
Installation