EDAN FTS-3 Service Manual page 16

FTS-3 Fetal Telemetry System Service Manual
1. FTS-3 can be used with F3 wall mounting component (02.04.118143) which you can order.
Base station and
transducer
2. Order a outer wall mounting board (01.52.107983), a wall mounting board (01.52.01983) and
a connecting board (01.52.107984).
3. Fix the connecting board on the wall mounting board with two M3*6 cross head screws. Fix
the connecting board and the wall mounting board in the inner wall mounting board with six
M3*8 cross head spring washer and flat washer package M3*8. Fix the outer wall mounting
board on the wall with six M3*20pan head cap screw.
Cross head spring washer and flat
washer package M3*8 (semi-adhesive)
Figure 2- 1
Inner wall mounting board
M3*6 Pan head screw
Wall mounting board
Figure 2- 2
- 10 -
F3 wall mounting
component
M3*6 Pan head screw
Screnw
Connecting board
Outer wall mounting board
Installation