Adjusting Color Controls - Ross PIVOTCam Control Panel User Manual

6. If you want to discard individual shots:
a. Tap the shot buttons for the shots you want to discard.
The shot buttons turn blue to indicate that the shots are selected.
Tip: If you accidentally tapped the wrong shot button, tap it again to deselect it.
b. Tap the Discard Selected button.
The shots are permanently discarded.
7. If you want to discard all deleted shots for the selected shot bank, tap the Discard All on Selected Bank
button.
All deleted shots in the selected shot bank are permanently discarded.
8. If you want to discard all deleted shots for the selected camera, tap the Discard All on Selected Cam button.
All deleted shots for the camera are permanently discarded.

Adjusting Color Controls

You can set the white balance mode for a camera.
To adjust color controls:
1. Tap the camera button for the camera you want to control.
Tip: The selected camera button is highlighted blue.
2. Tap the Color Controls tab.
3. In the White Balance box, select a white balance mode:
• Auto
• Indoor
• Outdoor
• One Push — To calibrate white balance, tap the One Push button.
• Manual — Set the Red Gain and the Blue Gain as desired.
PIVOTCam Control Panel User Guide (1.2)
Figure 4.13 - Discarding Deleted Shots
Using the PIVOTCam Control Panel • 4–17