Color Controls Tab - Ross PIVOTCam Control Panel User Manual

Color Controls Tab

The Color Controls tab enables you to set the white balance mode for the selected camera.
If you select Manual mode, you can specify whether recalling shots applies red gain and blue gain values that were
saved when the shots were created.
The Color Controls tab includes the following controls:
• White Balance box — Enables you to specify a white balance mode:
› Auto
› Indoor
› Outdoor
› One Push — To calibrate white balance, tap the One Push button.
› Manual — Set the Red Gain and the Blue Gain as desired.
Manual gain settings are saved in shots. If you want the camera to apply the saved gain values when shots are
recalled, select the corresponding Recall check box(es).
Note: Manual gain settings are always saved with shots. The Recall check boxes only control whether the
settings are applied when shots are recalled. You can select or clear these check boxes at any time.
3–14 • User Interface Overview
Figure 3.27 - Color Controls (Manual mode)
PIVOTCam Control Panel User Guide (1.2)