Deleting, Restoring, And Discarding Shots - Ross PIVOTCam Control Panel User Manual

Deleting, Restoring, and Discarding Shots

Permanently deleting shots is a two-steps process. First you delete the shot, and then you discard it. If a shot has
been deleted but not discarded, it can be restored.
You can delete and discard individual shots, all shots in the current shot bank, or all shots on the current camera.
Tip: If you want to perform several shot deletions, set Store Mode to Hold. For more information, see "Selecting
the Store Mode" on page 4–4.
To delete shots:
1. Tap the camera button corresponding to the camera that has the shots you want to delete.
2. Tap the shot bank button for the bank where the shots are stored.
3. On the Store/Recall Shots tab, tap the Delete Shots button.
The Delete Shots button turns blue, to indicate that the panel is in shot deletion mode.
4. If you want to delete a single shot, tap the shot button for the shot.
The shot button turns grey to indicate that the shot has been deleted.
5. If you want to delete all shots in the current shot bank, tap the Delete all Bank's Shots button.
A confirmation dialog box appears. Tap Delete.
All the shot buttons in the bank turn grey to indicate that the shots have been deleted.
Tip: If you want to delete most of the shots, you can delete them all and then restore only the shots you want to
keep.
6. If you want to delete all shots for the current camera, tap the Delete all Camera's Shots button.
A confirmation dialog box appears. Tap Delete.
All the shot buttons in all banks for the current camera turn grey to indicate that the shots have been deleted.
Tip: If you want to delete most of the shots, you can delete them all and then restore only the shots you want to
keep.
To restore deleted shots:
1. Tap the camera button corresponding to the camera that had the shots you want to restore.
2. Tap the shot bank button for the bank where the shots were stored.
3. On the Store/Recall Shots tab, tap the Delete Shots button.
The Delete Shots button turns blue, to indicate that the panel is in shot deletion mode.
4. Tap the Show Deleted Shots button.
5. An interface for managing deleted shots appears (Figure 4.12).
PIVOTCam Control Panel User Guide (1.2) Using the PIVOTCam Control Panel • 4–15