Store/Recall Shots Tab; Shot Bank Buttons - Ross PIVOTCam Control Panel User Manual

Store/Recall Shots Tab

Controls on the Store/Recall Shots tab (Figure 3.10) enable you to store, recall, rename, and delete shots. You can
also configure shot banks and the text on shot buttons.
Figure 3.10 - Store/Recall Shots Tab
The following sections describe the controls on the Store/Recall Shots tab:
• "Shot Bank Buttons" on page 3–6
• "Config Banks and Shots Button and Configuration Interface" on page 3–7
• "Shot Button Matrix" on page 3–8
• "Store Mode Buttons" on page 3–8
• "Recall Shots Button" on page 3–9
• "Store Shots Button" on page 3–9
• "Rename Shots Button" on page 3–9
• "Delete Shots Button" on page 3–9

Shot Bank Buttons

Shot bank buttons (Figure 3.11) enable you to select which bank of 100 shots is currently in use.
Figure 3.11 - Shot Bank Buttons
To select a bank of shots, tap the corresponding shot bank button.
Shot banks are numbered (0-99, 100-199, etc).
For information about adding and deleting shot banks, see "Configuring Shot Banks" on page 4–11.
3–6 • User Interface Overview PIVOTCam Control Panel User Guide (1.2)