Table of Contents
Advertisement
Problem
Wash pressure exceeds tol-
erance
Wash pressure fluctuating too
much
Water inlet and drainage
Problem
Check water inlet
Cause and remedy
The wash pressure differs from the reference value.
Possible causes of fluctuations in the wash pressure
include:
- Defective water connections,
- Open adapters,
- Foam build-up.
Identify and resolve the cause of this.
The programme is not interrupted. Nevertheless, you
must reprocess the load.
A programme was interrupted because of severe
fluctuations in the wash pressure.
Possible causes of fluctuations in the wash pressure
include:
- Defective water connections,
- Open adapters,
- Foam build-up.
Identify and resolve the cause of this.
Reprocess the load again.
Cause and remedy
One or more stopcocks are closed.
Open the stopcocks.
There was insufficient water in the machine.
Clean the water intake filters.
Open the stopcocks fully.
The supply pressure at the water connection is too low.
Refer to the specifications for supply pressure in the
"Technical data".
Contact a suitably qualified installer.
Problem solving guide
139
Advertisement
Table of Contents
