Avalue Technology ECM-CX700 User Manual page 60

ECM-CX700
3.5.2.7 First / Second / Third / Other Boot Device
The BIOS attempts to load the operating system from the devices in the sequence selected
in these items.
Item Description
Floppy Floppy Device
LS120 LS120 Device
Hard Disk Hard Disk Device
CDROM CDROM Device
ZIP100 ZIP-100 Device
USB-FDD USB Floppy Device
USB-ZIP USB ZIP Device
USB CDROM Device
USB-CDROM
Legacy LAN Network Device
Disabled Disabled any boot device
3.5.2.8 Boot Up NumLock Status
Select power on state for NumLock.
Item
Enabled Enable NumLock
Disabled Disable NumLock
3.5.2.9 Typematic Rate Setting
Key strokes repeat at a rate determined by the keyboard controller. When enabled, the
typematic rate and typematic delay can be selected.
Item
Enabled Enable typematic rate/delay setting
Disabled Disable typematic rate/delay setting
3.5.2.10 Typematic Rate (Chars/Sec)
Sets the number of times a second to repeat a key stroke when you hold the key down.
The choice: 6, 8, 10, 12, 15, 20, 24, 30.
3.5.2.11 Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat the keystroke.
The choice: 250, 500, 750, 1000.
3.5.2.12 Security Option
Select whether the password is required every time the system boots or only when you
enter setup.
Item
The system will not boot and access to Setup will be denied if the correct password is
System
not entered at the prompt.
The system will boot, but access to Setup will be denied if the correct password is not
Setup
entered at the prompt.
Note: To disable security, select PASSWORD SETTING at Main Menu and then
you will be asked to enter password. Do not type anything and just press
<Enter>, it will disable security. Once the security is disabled, the system
will boot and you can enter Setup freely.
60 ECM-CX700 Series User's Manual
Description
Description
Description