Wi-Fi Network 3 / 4 - LG MultiSITE MS8000 Series User Manual

Wi-Fi Network 3 / 4

Figure 22: Wi-Fi Network 3 / 4 Display.
The new SSID to access
the RC via the Configu-
ration web page.
Table 10: Wi-Fi Network 3 / 4 Parameter Details.
Configuration Parameters Default Value
Wi-Fi Status
Read Only
Signal Strength
Read Only
3/4 Wi-Fi Netw or k
Wi-Fi s tatus
S ignal stren gth
SSID :
Your Wi-Fi Network
IP addre ss:
10.10.10.20
When not connected to a Wi-Fi network the status remains Idle. After the RC is on the
preferred Wi-Fi network, the status will be displayed as Ready.
Status value: Ready or Idle
Signal strength of the Wi-Fi network.
Range: 0 to 100%
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG Life's Good" is a registered trademark of LG Corp.
NETWORK SCREENS
For MS8350 and MS8650
R eady
100%
The IP address to access the
Configuration web page.
Significance and Adjustments
Wi-Fi Network 3 / 4
27