User And Integrator Screens - LG MultiSITE MS8000 Series User Manual

USER AND INTEGRATOR SCREENS

User and Integrator Screens
The Room Controllers have dynamic screens and parameters that only appear on certain models or based on the presence of a communica-
tion module (VCM). The LUA tab on the second menu screen will also only show if a LUA script is uploaded to the Room Controller.
Figure 12: MS8350 Screen Details.
Parameter Screen
6/7 Configuration
Language Variable English XXXX
Variable XXXX
Units °C
Low backlight Variable XXXX 60 %
Night backlight 5 %
RH display Disable
Next
Previous
Screen
Return to
Screen
Previous
Menu
1. When any change is made to a parameter, the value is permanently saved in the database when the next parameter is selected or
another screen is opened. This event is true only if a parameter was changed locally on the Room Controller. Making changes through
BACnet will not have the same outcome. If permanent changes need to be done remotely through BACnet, use priority 1, 2 or 3, or write
to relinquish default (priority 17).
2. The ZigBee PRO communication module must be Revision 10 (R10) or later to support newly introduced ZigBee devices to the market.
®
3. The controller must be running Firmware version 1.7 or later to enable the Automatic Demand Response (ADR) feature.
ZigBee PRO is a are registered trademarks of the ZigBee Alliance, Inc.
®
18
Read Only
Parameter
Adjustable
Parameter
Some parameters
appear only in
models with on-
board ZigBee,
Wi-Fi module, or
if a LUA script is
uploaded.
Change Value
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG Life's Good" is a registered trademark of LG Corp.
Figure 13: MS8650 Screen Details.
Parameter Screen
6/7 Configuration
Parameter Language XXXX English
Parameter Units XXXX °C
Parameter Low backlight XXXX 60 %
Parameter XXXX
Night backlight 5 %
RH display Disable
Next
Previous
Screen
Return to
Screen
Previous
Menu
Read Only
Parameter
Adjustable
Parameter
Some parameters
appear only in
models with on-
board ZigBee or
Wi-Fi VCM, or if
a LUA script is
uploaded.
Change Value