Setting the ACP IV network address
After connecting the ACP IV to various devices via the cable, the network environment of the ACP IV
should be set by driving the ACP IV. The following information should be set for using the ACP IV.
• IP address of the ACP IV
• Gateway address
• Net mask
Setting the network environment information
If the above information is not entered, the communication error may be occurred or it may be
impossible to control by the ACP IV. So, be careful to correctly input.
Before configuring the ACP IV environment
The network environment of the ACP IV can be set by the LCD and the buttons at the front side of the
The current ACP IV information and the menu are displayed on the LCD, and the menu can be
changed and selected by pressing
button and Up/Down/Left/Right (▲, ▼, ◀ , ▶ )
Installing ACP IV