LG MultiSITE MS8000 Series User Manual page 10

HMI DISPLAY AND SET UP
For MS8350 and MS8650
Enter Set-up Screen
Figure 2: Enter Set-up Screen Display.
Figure 3: Set-up Screen Display 1 / 2.
1/ 2 Set u p
N e tw o rk
C o n fig u r at io n
S e tp o in t s
D i s p la y
S e r vi ce v ie w
Te s t O u t p u ts
Return to "Discover Mode" shows wireless
Previous Menu ZigBee network.
10
Touch and hold this point for three
(3) seconds to enter set-up mode.
If a configuration / installer password is activated to prevent unauthorized access to
the configuration menu parameters, a password entry prompt shows to prevent ac-
cess to device configuration components.
BACnet MS/TP, Modbus and ZigBee
Parameter Configuration Menu
Setpoint Settings
Display Settings
Status Display (Read Only)
Test Outputs Settings
ZigBee
®
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG Life's Good" is a registered trademark of LG Corp.
is a registered trademark of the ZigBee Alliance, Inc.
network settings
®