LG MultiSITE MS8000 Series User Manual page 45

MS8650 Configuration 3 / 11
Figure 35: MS8650 Configuration 3 / 11 Display.
3/11 Co n fi g u ratio n
Stan d b y ti me
Un o cc. ti me
Temp . o cc. ti me
Temp . sen so r
Deh . h ysteresis
Deh . l o cko u t
Table 28: MS8650 Configuration 3 / 11 Parameter Details.
Configuration Parameters Default Value
Standby time
Default: 0.5 hours
Unocc. Time (Unoccupied Time)
Default: 0.0 hours
Temp. Occ. Time (Temporary
Occupancy Time)
Default Value: 2 hours
0.5 h rs
0. 0 h rs
2.0 h rs
Wired
5 %RH
D is a b le d
Time between the moment where the PIR cover detects last movement in the area, and the time
which the Controller stand-by setpoints become active.
This parameter is not active when the "Door" function is used (wired or wireless).
Range: 0.5 to 24.0 hours (0.5 hour increments)
Time between the moment where the Room Controller toggles to stand-by mode, and the time
which the Room Controller unoccupied mode and setpoints become active.
Default value of 0.0 hours disables the unoccupied timer. This prevents the Room Controller from be-
ing able to switch from stand-by mode to unoccupied mode when PIR functions are used.
Range: 0.0 to 24.0 hours (0.5 hour increments)
The time the Room Controller stays in override mode before reverting back to unoccupied mode.
When the Room Controller is in unoccupied mode, pressing the on-screen Override icon or clos-
ing the contact on UI17, configured as "Remote Override", sets the Room Controller to Override
mode for defined time period, and uses the Occupied Cooling and Heating setpoints.
Range: 0.0 to 24.0 hours
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG Life's Good" is a registered trademark of LG Corp.
CONFIGURATION SCREENS
MS8650 Configuration 3 / 11
Significance and Adjustments
For MS8650 Only
45