Heated Mirrors - If Equipped; Illuminated Vanity Mirrors - If Equipped; Exterior Lights; Headlights - Jeep 2020 RENEGADE Owner's Manual

Table of Contents

Advertisement

40
GETTING TO KNOW YOUR VEHICLE
Heated Mirrors — If Equipped
These mirrors are heated to melt frost
or ice. This feature can be activated
whenever you turn on the Rear
Window Defroster. Refer to "Climate Controls"
in this chapter for further information.
Illuminated Vanity Mirrors — If Equipped
An illuminated vanity mirror is located on each
sun visor. To use the mirror, rotate the sun visor
down and swing the mirror cover upward. The
lights will turn on automatically. Closing the
mirror cover will turn the light off.
Vanity Mirror
1 — Mirror Light
2 — Mirror Cover

EXTERIOR LIGHTS

Headlights

The headlight switch is located on the left side
of the instrument panel. The headlight switch
controls the operation of the headlights, side
marker and parking lights, daytime running
lights, fog lights and the dimming of the
instrument cluster and interior lighting.
Headlight Switch
Turning on the headlights will illuminate the
instrument cluster and the controls located on
the instrument panel.
Daytime Running Lights (DRLs) — If
Equipped
The Daytime Running Lights (DRLs), if enabled
through Uconnect Settings, will turn on when
the instrument cluster is on and remain on
unless the headlights are turned on or the
instrument cluster is switched off.
In the bulb lighting version, the DRLs will be
disabled during turn signal operation and
resume operation when the turn signal
operation has ended.

High Beams

To turn on the high beam headlights, push the
turn signal lever forward (toward the front of the
vehicle) and an indicator will illuminate in the
cluster. To turn off the high beams, pull the turn
signal lever rearward (toward the rear of the
vehicle).

Advertisement

Table of Contents
loading

Table of Contents