13
Touchscreen Menu Tree
13.1
Front Panel Layout
The diagram below shows the menu tree for the touchscreen display. The four folder tabs and their associated sub-menu
choices are shown on the left, and a description of the displays /choices are detailed on the right.
Tab: Main
Tab: Monitor
Tab: Settings
Records Menu
Tab: Records
1600XPi Series UPS Installation and Operation Manual – 60616-014
ID / RUN-STOP
Monitor Menu
IN
DC
OUT
BYP
Settings Menu
ID
Output
DC Bus
Ctrl/Cfg
Disp/Reye
Test
Faults
Operation
MAIN – Displays the starting screen. It
has a RUN and STOP key that place the
UPS in In-Line or Bypass mode respec-
tively.
MONITOR – Graphically displays the
current status of the UPS (OnLine, Back-
up, Bypass, Shutdown) in an interactive
BAT
power flow block diagram. Selecting one
of the blocks provides additional detailed
C&C
data of the Input (IN), Output (OUT), By-
pass (BYP), Battery (BAT), and DC Bus
D&R
(DC), Control & Configuration (C&C),
and Display & External (D&E) devices.
SETTINGS – Allows monitoring and/or
modification of UPS parameters. Pa-
rameters that can be viewed or modified
vary depending on the security level of
the login password entered using key-
Input
pad.
Bypass
Batt
History
Records – Displays the most recent 32
Test, Backup, Faults, Warning, Opera-
tion, and System change records.
Backup
System records are only available at the
distributor and depot security levels.
Warnings
In any record set, if more than 32 inci-
System
dences have occurred, only the most
recent 32 record are retained in each
report.
29