Display And Keys; Front Panel Layout; Display Manual Controls - Toshiba 1600XPi Series Installation And Operation Manual

11

Display and Keys

11.1

Front Panel Layout

The front panel consists of several elements for monitoring and operation of the UPS. Panel components are shown in the
illustration below:
HARDWARE RUN/STOP SWITCH
DISPLAY CONTRAST ADJUSTMENT
(MIDDLE LEFT SIDE OF PANEL)
11.2

Display Manual Controls

Hardware Run/Stop Switch – Pressing the contact switch momentarily will toggle the UPS state between RUN and
Bypass. For Instance, while the UPS is in RUN mode, pressing the switch will change the mode to Bypass. Pressing
the switch again will switch the UPS back to RUN mode.
Display Reset Switch – When necessary, the touchscreen display can be reset by using a thin probe, such as a paper clip,
to press the display reset switch.
Display Contrast Adjustment – The display is shipped with the display adjusted for optimum visibility. If necessary use a
trimmer adjustment tool to fine tune the display contrast for improved visibility.
1600XPi Series UPS Installation and Operation Manual – 60616-014
LCD TOUCH SCREEN
STATUS LEDS (PAGE 25)
96% 100%
HOME
USR
Main Monitor
1600
XP
On-Line UPS
UPS Serial Number
20080112345
UPS Typeform
UXPB2B100C6
ASYN
DVCOH
DVCOH ASYN
1600XPi
On-Line/Fault Warning
(LOWER RIGHT SIDE OF PANEL)
INV 12:35 PM
Settings Records
UPS Controls
RUN
STOP
Shutdown On-Line
On-Line UPS
A/C Input
DISPLAY RESET SWITCH
25