Touchscreen Menu Tree; Front Panel Layout - Toshiba 1600XP SERIES Installation And Operation Manual

14. Touchscreen Menu Tree

14.1 Front Panel Layout

The diagram below shows the menu tree for the touchscreen display. The four folder tabs and their
associated sub-menu choices are shown on the left, and a description of the displays /choices are detailed
on the right.
Tab: Main ID / RUN-STOP
Tab: Monitor Monitor Menu
Tab: Settings Settings Menu
Records Menu
Tab: Records
26
IN
DC
OUT
BYP
ID
Output
DC Bus
Ctrl/Cfg
Disp/Reye
Test
Faults Warnings
Operation
MAIN – Displays the starting
screen. It has a RUN and STOP
key that place the UPS in In-Line or
Bypass mode respectively.
MONITOR – Graphically displays
the current status of the UPS (On-
Line, Backup, Bypass, Shutdown)
BAT
in an interactive power flow block
diagram. Selecting one of the
C&C
blocks provides additional detailed
data of the Input (IN), Output (OUT),
D&R
Bypass (BYP), Battery (BAT), and
DC Bus (DC), Control & Configura-
tion (C&C), and Display & External
(D&E) devices.
SETTINGS – Allows monitoring
and/or modification of UPS pa-
Input
rameters. Parameters that can be
viewed or modified vary depending
Bypass
on the security level of the login
password entered using keypad.
Batt
History
Records – Displays the most re-
cent 32 Test, Backup, Faults,
Warning, Operation, and System
Backup
change records.
System
System records are only available
at the distributor and depot security
levels.
In any record set, if more than 32
incidences have occurred, only the
most recent 32 record are retained
in each report.
1600XP Series Installation and Operation Manual