PREVOST H3-45 VIP Owner's Manual page 181

Using The Test Mode:
First, test the functionality of the commands related
to the exterior lighting:
Activate the right directional signal and check
l
that the corresponding cluster telltale light
illuminates.
Activate the left directional signal and check
l
that the corresponding cluster telltale light
illuminates.
Activate the hazard warning flashers and
l
check that the corresponding cluster telltale
lights illuminate.
Press the headlights rocker switch in first
l
position and confirm that the instrument panel
illuminates. Press the headlights rocker
switch in second position and confirm that the
headlights illuminate.
Turn on the high beams and check that the
l
corresponding cluster telltale light illuminates.
Press onthe brake pedal and check that the
l
STOP telletal light illuminates
Once these commands tested, activate the test
mode to check the exterior lighting by pulling up the
multi-function lever 3 times within 3 seconds.
Go to the front of the vehicle and check the lights:
Left and right directional signals.
l
Identification lights and clearance lights.
l
Low beams.
l
High beams.
l
Left side and right side of the vehicle:
Directional signals.
l
Marker lights.
l
Rear of the vehicle:
Directional signals.
l
Identification lights and clearance lights.
l
Stoplights and tail lights.
l
Back-up light.
l
Center High mounted Stop Light (CHSL)
l
PA-1638 Owner's Manual X3-45 VIP
Care and Maintenance 8-15