5-22 Other Features
AFTERTREATMENT
This menu permits to the driver to initiate a stationary regeneration, to check the status of the aftertreatment
system and to interrupt regeneration.
4. Reset Trip Data
This menu can only be accessed if the correct password has been entered.
Use this function to reset measurements of the Trip Data menu before each new
trip or leg.
1. Request Parked REGEN
Use this function to initiate a stationary (parked) regeneration.
2. ATS Status
The Aftertreatment status sub-menus provide information about the conditions
required for performing regeneration. The status can be OK (regeneration allowed),
CHECK (regeneration not allowed) or N/A (not applicable). When ATS Status is
selected, the following displays (images at left) will show.
PA-1638 Owner's Manual X3-45 VIP