Time/Distance - PREVOST H3-45 VIP Owner's Manual

5-14 Other Features

TIME/DISTANCE

The time and date can be set in the Time/Distance menu. The alarm clock can also be set from this menu.
Following the alarm clock menu is the Trip Odometer 1 and 2 selection, which allows the operator to see the
distance traveler since the last reset. Average trip speed is also shown. By specifying the distance to your
destination, the vehicle can calculate the estimated time of arrival (ETA).
2. Fuel Flow/ ECO%
The lower numerical value (0.0) indicates the instantaneous fuel consumption. In
this menu, you can reset the upper numerical value which is the average fuel
consumption (0.7). To reset, hold ENTER button for 1 second.
This menu also displays the percentage of trip made on regenerated electricity
(10%).
3. Trip Fuel Used
Indicates the total fuel consumption (gallons/liters) since the last reset.
Note: You should use Reset function before each new trip.
You can reset the fuel consumption value in this menu. To reset, hold ENTER
button for 1 second.
4. Distance to Empty
The left numerical value indicates the distance that can be traveled with the
quantity of fuel that remains in the tank as indicated by the right numerical value.
1. Time And Date
Adjust time and date with this menu. The instrument cluster has its own internal
battery, so the date and date setting is keep in memory even if the vehicle's battery
is disconnected.
2. Alarm Clock
Use this function to program and activate an alarm on the instrument cluster clock.
When the alarm clock goes off, a warning signal is sounded. The alarm shuts off
after 60 seconds or if the ESCAPE button is depressed.
3. Trip Odometer 1 and 2
Allows the operator to see the distance traveled since the last reset. You can reset
the trip odometer 1 or 2 in this menu. To reset, depress ENTER button, use
UP/DOWN button to select between odometer 1 or 2 and then hold ENTER button
for 1 second.
PA-1638 Owner's Manual X3-45 VIP