probst POWERPLAN PP Operating Instructions Manual page 66

Operating Instructions
PP
65 / 73
Maintenance and care
V4
1. Open the engine hood. See "Opening
the engine hood".
2. Remove the protective cap from the
positive terminal.
3. Connect the positive lead (1) to the
positive terminal on the second
battery.
4. Connect the positive lead (1) to the
positive terminal (2).
5. Connect the negative lead to the
negative terminal on the second
battery.
6. Earth the negative lead on the
machine, e.g. connect it to the engine
or frame.
7. Start the motor of the vehicle you are
using to jump-start the machine.
8. Start the engine of the machine. See
"Starting the engine".
9. Once the motor has started,
disconnect the minus lead first while
the engine runs at idle speed. Always
start with the other vehicle's battery
when disconnecting the leads.
10. Disconnect the positive lead (1) from
the positive terminal (2). Always start
with the other vehicle's battery when
disconnecting the leads.
11. Attach the protective cap over the
positive terminal.
12. Close the engine hood.
GB