Maintaining The Crawler Tracks - probst POWERPLAN PP Operating Instructions Manual

Operating Instructions
PP
6.5.6

Maintaining the crawler tracks

Checking the crawler chain tension
The crawler chain tension must be checked at the first 50 hours and then every 50 operating hours.
Please refer to the separate manual for the engine crawler undercarriage (TFW) for a detailed description.
60 / 73
Maintenance and care
V4
1. Open the engine hood. See "Opening
the engine hood".
2. Press onto the v-belt (1) with your
thumb. The v-belt should give by
about 7-9 mm (A) when pressed
down.
3. If necessary, get the v-belt tensioned
by customer services.
4. If necessary, get the v-belt changed
by customer services.
5. Close the engine hood.
1. Lift the machine a small section off
the floor. See inter alia chapter
"Lifting the machine", or see the
following "Figure A1" in this chapter
("Maintaining the crawler tracks").
2. Check the dimensions of (A) in the
centre of the chain guide.
Measure (A) should be 10-30 mm. If
necessary, tension or loosen the
crawler chain.
GB