Controlling Engine Speed - probst POWERPLAN PP Operating Instructions Manual

Operating Instructions
PP
Risk of damage to property
If the warning lights fail to extinguish, there is a fault.
•
5.5.3

Controlling engine speed

42 / 73
Operating the machine
Repair the fault immediately.
5. If the machine is in automatic mode,
it will make a signal sound.
Push the toggle switch (2) down.
6. Push the toggle switch (2) up.
The Screeding Machine POWER PLAN
PP is now ready to be driven.
Move the lever (1) into the required
position.
Lever positions:
•
Left: Low speed for use when
starting the engine or during brief
operating breaks.
•
Right: High speed for driving mode or
when driving up slight elevations.
•
Operating speed: ⅔-speed, which
guarantees that the hydraulic system
works at its optimum.
V4 GB