probst POWERPLAN PP Operating Instructions Manual page 30

Operating Instructions
PP
5.1.2 Operating equipment and indicators
1 Raise the smoothing board on the left
2 Fuel indicator
Oil pressure control light →
3
Preignition indicator →
4
5 Battery control light→
6 Operating hours indicator
7 Raise the smoothing board on the right
8 Lower the smoothing board on the right
9 "Manual" (driving setting 1) or "Automatic" (driving setting 0) driving
mode
10 Raise the smoothing board (adjusting lever to the right + press the
button)
Lower the smoothing board (adjusting lever to the left)
Driving setting switch →
11
0 Driving setting for screeding mode
I Driving setting for driving mode
12 Working lights (* optional light package)
13 Lower the smoothing board on the left
14 Indicator for optional diesel particle filter DPF
Display RED = Replace particle filter
Display GREEN = Particle filter OK
15 Vibrator function of the hopper (* optional)
16 Coolant temperature
29 / 73
Operating the machine
V4
See "Oil pressure control light".
See "Starting the engine".
See "Battery control light".
See "Selecting the driving settings and
operating mode".
See "Selecting the driving settings and
operating mode".
See arrows in figure below
See "Coolant temperature indicator".
GB