probst POWERPLAN PP Operating Instructions Manual page 64

Operating Instructions
PP
Connecting and disconnecting the battery
Risk of personal injury
There is a risk of short circuiting and sparking when connecting and disconnecting the battery.
•
•
63 / 73
Maintenance and care
Only connect and disconnect the battery if the electrical system has been switched off at the
main switch.
Make sure to connect and disconnect the battery in the stated order.
Disconnecting:
1. Open the engine hood. See "Opening
the engine hood".
2. Remove the protective cap from the
positive terminal.
3. Disconnect the negative clamp (1).
Make sure that the clamp is no longer
in contact with the negative terminal.
4. Disconnect the positive clamp (2).
Connecting:
5. Grease the top of terminals and cable
clamps with acid-free grease.
6. Connect the positive clamp (2) first,
then the negative clamp (1).
7. Attach the protective cap over the
positive terminal.
8. Close the engine hood.
V4 GB