Adjusting The Damper Speed For The Front Chute; Selecting The Drive Setting And Driving Mode - probst POWERPLAN PP Operating Instructions Manual

Operating Instructions
PP
5.5.4

Adjusting the damper speed for the front chute

Depending on the operating method and operator's speed, the damper speed of the front chute can either be increased or
reduced.
5.5.5

Selecting the drive setting and driving mode

43 / 73
Operating the machine
①
V4
Throttle valve (1) = Raises the front chute.
Throttle valve (2) = Lowers the front
chute.
Adjusting the Effect
damper speed
Setting
Turning it Reduces the
clockwise speed
Turning it Increases the
anticlockwise speed
1. Loosen the grub screw on the
throttle valve.
2. Turn it by ¼ turn into the relevant
direction.
3. Now actuate the front chute.
4. If necessary, readjust the damper
speed.
5. Tighten the grub screw.
Drive setting "0" for screeding mode (for
driving with filled hopper).
Switch toggle switch (1) to 0 (max. speed
1.6 km/h)
Drive setting "I" for driving mode (for
driving with empty hopper)
Switch toggle switch (1) to I
(max. speed 3.2 km/h)
GB