Adjusting The Adjustable Panels; Raising/Lowering The Smoothing Board - probst POWERPLAN PP Operating Instructions Manual

Operating Instructions
PP
5.5.9

Adjusting the adjustable panels

The adjustable panels are located on the left and right side of the machine.
5.5.10

Raising/lowering the smoothing board

47 / 73
Operating the machine
V4
1. Pull out the lock bolt (1) and turn.
2. Move the adjustable panel (2) into
the required position. A detailed
description of how the adjustable
panel can be adjusted during
operation can be found in the
separate operating tips, in the
section "Adjusting the adjustable
panels".
3. Keep turning the lock bolt (1) until
it audibly engages.
4. If necessary, continue turning the
lever (3) until the bottom lip of the
adjustable panel (2) is parallel to
the ground.
Raising the smoothing board
1. Move the lever (1) in the direction of
the arrow.
2. Continue pressing the toggle switch
(2) until the smoothing board has
been fully raised.
Lowering the smoothing board
Slowly move the lever (1) in the direction
opposite the arrow.
GB