Checking The Engine Oil Level - probst POWERPLAN PP Operating Instructions Manual

Operating Instructions
PP
5.3.2

Checking the engine oil level

34 / 73
Operating the machine
V4
1. Park the machine on level ground,
switch it off and leave to cool for
around 5 minutes.
2. Open the engine hood. See "Opening
the engine hood".
3. Pull out the dipstick (1) and clean with
a lint-free, clean cloth.
4. Reinsert the dipstick (1) and pull it out
again.
The oil level must be between marks
(2) and (3).
If the engine oil needs to be topped
up:
5. Unscrew the cap (4) and top up with
engine oil through the filler pipe.
6. Once the oil has been topped up, wait
for at least 5 minutes. Now check the
oil level again.
See "Technical data" for information
on operating fluids and filling
capacities.
7. Close the engine hood
GB