Krick Fishing Cutter Antje Building Instructions page 39

Now push the exhaust pipe flush into the damper
pipe and glue it together.
Fig. spacers mounted
Fig. exhaust pipe
Now the exhaust pipe can be painted with silver
paint.
Then bend the holder 3.26 out of brass wire.
Insert the exhaust pipe into the opening in the
front of the superstructure and fix the holder
above the window. Glue the exhaust pipe to the
body and to the bracket.
Fig. superstructure with exhaust pipe
Attach hinges 3.37 and door handles 3.38 to the
body.
Stand Mai 2019
Fig. hinges and door handles
Now the superstructure can be glued to the sub-
structure / hatch cover.
Fig. Position the superstructure on the hull
Place the substructure over the deck cutout. Posi-
tion the superstructure on the rear side of the
substructure and tack the superstructure with
superglue from above through the removed roof.
Fig. gluing
The next step is to build the companionway.
To do this, assemble parts 3.44 to 3.54.
Seite 11
Klebstoff
©
Krick Modelltechnik Knittlingen