Service Level; Display Of The Service Level - Siemens LME39 Series Basic Documentation



P
/reset
Building Technologies Division
18

Service level

The service level is used to display information about errors including the error history.
Note!
When on the service level, you can press
previous parameter.
Instead of pressing
Note!
ESC
Press or
/reset
18.1

Display of the service level

V h min s %
Basic Documentation LME39...
18 Service level
or
, you can also press
/reset
for >8 seconds to return to the normal display.
for >3 seconds until SEr appears.
Press
/reset
When releasing , you are on the service level.
/reset
to display the next or the
for <1 second.
51/73
CC1P7106en
08.12.2017