System - RGBlink VENUS X2 User Manual

4. Menu Orientation
MENU
DELAY CALL: When multiple device power on, and the processor is the
end device, in order to improve the problem that can't identify the input
signal or the phenomenon that LED screen appear messy code and flash
screen, it needs to set the delay boot time.
SCENE: Choose the scene that will delay call.
SAVE PAGE: Choose the save page that will delay call.
DELAY TIME: Set the delay time.

SYSTEM

Push the [MENU] button to go into the menu items, turn the knob button to
select <SYSTEM>, show menus as follows:
SYSTEM INFO: Show the serial number, device information and tech
support information, shown as follows:
SN: Show the serial number of the device.
DEVICE INFO: Show the version of input card, output card, COM. CARD
and KEYPAD.
TECH SUPPORT: Show the factory sales, customer service, email and
other contact information, etc.
DATE&TIME: User can view and change the date, time and week, view the
current time, total time and boot times.
ETHERNET: DHCP, IP, mask, gateway, MAC and WIFI setting. User can
enable or disable the DHCP function. System default IP address is
192.168.000.100, mask is 255.255.255.000, gateway is 192.168.000.001.
User can enable or disable the WIFI function. When choose ―ON‖, choose
the WIFI mode, user can choose STA or AP mode, and then scan the
network, etc.
FAN CONTROL: User can able or disable the auto speed function, and set
the current speed.
TIMER: User can set the timer power on and timer power off from Sunday
VENUS X2 User Manual 32