System - RGBlink Q16pro Gen2 1U User Manual

Then view the LCD screen to check if the operation is successful, if the above operation is ok, the screen will
display as follows.

3.3.6 System

After the device is boot up, push MENU to enter main menu interface. Then rotate the knob and select <System>.
System
SN
To check serial number of the device.
Black Out
Q2 1U provides black effect processing for output with cut black effect, which can realize one-key-touch to a black
screen. Rotate the knob to Black Out to turn on black effect processing.
Software Version
Rotate the knob to Software Version to check communication module version, input module version and output
module version.
COM Module
Input1 board
Input1 fpga
Input2 board
Input2 fpga
Network Setting
Rotate the knob to Network Setting.
Q16pro Gen2 1U
Load succeed
>> SN
Black Out
Software Version
Network Setting
Fan Speed
Language 语言
Factory Reset
Output1 board
V1.29
Output1 fpga
V1.06
V1.17
V1.06
V1.17
User Manual
1024
OFF
>>
>>
>>
ENG
V1.05
V1.13
18