5. Communication Software Guideline
Software Operation
Select DSK ON, as shown in figure
, then set the input ports,
including preset selection, custom mode, alpha and color setting. Click ―Set‖ to
confirm.
Source Backup
Click the ―Source Backup‖, and pop-up window as follows:
Enable the hot backup function, as shown in figure
, and set the
backup signal for Hot Backup 1 to Hot Backup 8. It will switch to the backup
signal if the signal is interrupted.
Source Merge
Click the ―Source Merge‖, and pop-up window as follows:
VENUS X2
User Manual
60