RGBlink VENUS X2 User Manual page 65

5. Communication Software Guideline
Software Operation
Select the function that needed to factory reset, and click ―OK‖ to confirm.
Streaming IP & Power On Setting
Click the ―Streaming IP & Power On Setting‖, and pop-up window as follows:
H.264 Display: Enable or disable the H.264 display function. If select ―ON‖,
the interface will display the H.264 video when enter to the operation mode,
which is for preview.
IP Address: Set the IP address of H.264 video, click ―Set‖ after setting.
Time-Lapse Power On: The adjustment range is 0~255, click ―Set‖ after
setting.
VENUS X2 User Manual 65