RGBlink VENUS X2 User Manual page 57

5. Communication Software Guideline
Software Operation
Click ―OK‖, and the system will synchronize the data, about 5 seconds later, it
will enter the interface as follows:
In matrix mode, any operations are unavailable except signal selection, bank
selection, alpha time and black scene setting.
Default source 1 to monitor 1, source 2 to monitor 2, and so on. Select the
signal, and drag it to the source that will set. For example, set signal 3 for
source 1, as shown in the figure below:
VENUS X2 User Manual 57