Table of Contents
Advertisement
Digital buttons 0-9 will be always on or flashing. An always-on button indicates that certain preset has
been saved at this position; A flashing button indicates that certain preset has been saved at this
position already, which is ready for recall.
System
After the device is boot up, push MENU to enter main menu interface. Then rotate the knob and select
<System>.
SN: To check serial number of the device.
Black Out: Black Out to turn on black effect processing.
Software Version: Check module version.
Network Setting: Check Mac address and turn DHCP ON/OFF.
Fan Speed: Support manual or automatic adjustment of fan speed.
Language 语言: English or Chinese available.
Factory Reset: Confirm by pushing knob, cancel by pushing any other key.
XPOSE 2.0
Physically Connect Device to Computer
Use RJ11-DB9 serial cable to connect RS232 port of device and computer, or use CAT5/6 cable to
connect LAN port of device and computer, or connect both device and computer to the same router.
XPOSE 2.0 Operation
Download XPOSE 2.0 software from RGBlink website.
https://www.rgblink.com/xpose_software.aspx
Please refer to user manual of Q16pro Gen2 1U for how to install and operate XPOSE 2.0.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
SN
Black Out
Software Version
Network Setting
Fan Speed
Language 语言
Factory Reset
support@rgblink.com
1024
OFF
>>
>>
>>
ENG
|
www.rgblink.com
13 / 14
Advertisement
Table of Contents
