Input Settings - RGBlink VENUS X2 User Manual

5. Communication Software Guideline
Software Operation
Click ―Ok‖, the settings will be displayed in the monitor, as shown in the figure
below. Click ―Take‖ or ―Cut‖ in ―Take‖ box to seamless switch or cut the preview
signal to the LED display.

Input Settings

Click the ―Input Settings‖, and enter the interface as follows:
DSK settings, source backup and source merge are included in input settings,
specific as follows:
DSK Settings
Click the ―DSK Settings‖, and pop-up window as follows:
VENUS X2
Note
The adjustment for monitor is available when
there is no any layer in PST or PGM window.
User Manual 59