RGBlink VENUS X2 User Manual page 42

5. Communication Software Guideline
Software Operation
Output Setting, DE Setting, Test pattern and OSD are included in output
settings, specific as follows:
Output Setting
Click the ―Output Setting‖, and pop-up window as follows:
Output: Click the drop down arrow after the format, and select the output
resolution in the pull-down menus according to actual need.
Format: The width, height and frequency can be set if select ―Custom‖ in
―Format‖. Click ―Setting‖ to confirm.
Genlock: User can enable or disable the genlock function by sliding the
genlock switch. If select ―ON‖, the output resolution will be same with the
resolution that selected. HDMI or BNC can be selected in ―Input Source‖ by
sliding the switch.
VENUS X2 User Manual 42