Input Setting - RGBlink Flexpro 8 User Manual

Input Setting

1. Click any input port in purple area, the board where the port locates is selected. Users can do
settings to the board now. A red rectangle flashes around the chosen port when it is clicked.
2.1 When DVI is chosen, Property, EDID Setting could be done.
2.1.1 Property
Input Port：Current port
Source:CVBS,YPbPr, VGA, DVI (DVI module for Flexpro 8 support for CVBS,YPbPr, VGA signal via
adapter)
Scale
X/Y：Vertical and horizontal position
Width/Height：Vertical and horizontal size
Crop：
Left:crop left
Top:crop top
Width:horizontal size after crop
Height:vertical size after crop
Display mode：Live or Freeze
Picture Adjustment
Mirror：ON or OFF
Alpha：transparency adjustment, range from 0~128.
Mini Delay mode:On or Off. Select this mode on the output and input is simultaneously, without
refresh rate delay.
Under this mode, the image is under the best state.
Saturation：slide to adjust
Hue：slide to adjust
Color Temperature
Red：Slide to adjust
Green：Slide to adjust
Blue：Slide to adjust
Felxpro 8 User Manual
26