Input Setting - RGBlink FLEX RS1 User Manual

3.2.6 Input Setting

Click the "Input Setting", and enter the interface as follows:
Click the "4K Input Set" and pop-up window as follow:
Work Mode: Click the drop down arrow, select the input source among "4K x 2K" ,"4K x
1K" "2K x 1K"
Input type: Dual DVI, HDMI 1.4, HDMI2.0, DP1.2
Under the 'Work Mode" of 4K x 2K, users can only choose one input.
Under the "Work Mode" of 4K x 1K or 2K x 1K,Users can choose two same input or two
different input. See the example below when users select 4K x 1K "Work Mode".
FLEX RS1 User Manual
26