System Setting - RGBlink Flexpro 8 User Manual

3.2.8 System Setting

Click this icon and enter the interface
System Info,Software Version and Language options with English and Russia to choose.
Communication Setting,this is to decide how XPOSE to communicate with the device
By serial port,ethernet connection,or both are chosen
Find Device：choose the devices that users need to be connected
Authorization setting：type in the password and to set up subordinate user's authorization.
Display Setting：Slide Expanding Mode to On, 16 displays can be viewed on XPOSE.
Slave Unit：
Slave Unit is to control multiple devices simultaneously, which are connected to same network.
("In the same network" means the the the third section in the IP address digits are the same )
Felxpro 8 User Manual
53