Input Setting - RGBlink Q16 Quick Start Manual

Input Setting

Click any input port in purple area, the board where the port locates is selected. Users can do settings to the
board now. A red rectangle flashes around the chosen port when it is clicked.
Different input modules port could have different input setting on Q16 subject to their features but generally
there are such input settings as: Property Setting, EDID Setting.
Here are figure listing the of input ports and their output setting supported.
Property Setting
When HDMI 1.3 or DVI port is selected
Input Port：Current port
Scale
X/Y：Vertical and horizontal position
Width/Height：Vertical and horizontal size
Crop：
Left:crop left
Top:crop top
Width:horizontal size after crop
Height:vertical size after crop
Phase Adjustment
Sampling Phase:0~31
Picture adjustment
Brightness:0~255
Saturation:0~255
Contrast：0~255
Hue：0~255
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com
17 / 34