Layer Management - RGBlink Flexpro 8 User Manual

3.2.5 Layer Management

Layer Management is designed to manage the layer of each monitor. Click this icon to
enter the interface:
Display Area
Here is to show all the Display Area set in previous step System Management. Click to
cancel or use the corresponding Display Area.
Signal
To show the signal list of 16 inputs. Drag source from signal list to monitor
Numbers on Monitor
Numbers on monitor is to show how many layers at present allowed to put in the monitor .
Each monitor (output port) can contain layers no more than 4. Any 1 input signal cross 1 border
of a monitor is regarded as 2 layers.
Felxpro 8 User Manual
40