Input Setting - RGBlink FLEXpro 8 Quick Start Manual
Hide thumbs
Also See for FLEXpro 8:
- User manual (65 pages) ,
- User manual (69 pages) ,
- Quick start manual (50 pages)
Table of Contents
Advertisement
Pattern
DE Setting
√
OSD
Property
√
Input Setting
1. Click any input port in purple area, the board where the port locates is selected. Users can do settings to the
board now. A red rectangle
2.1 When DVI or HDMI is chosen, Property, EDID and Test Pattern could be done.
2.1.1 Property
DVI port Property setting
Input Port：Current port
Source:CVBS,YPbPr, VGA, DVI (DVI module for Flexpro 8 support for CVBS,YPbPr, VGA signal via adapter)
Scale
X/Y：Vertical and horizontal position
Width/Height：Vertical and horizontal size
Crop：
Left:crop left
Top:crop top
Width:horizontal size after crop
Height:vertical size after crop
Display mode：Live or Freeze
Picture Adjustment
Mirror：ON or OFF
Alpha：transparency adjustment, range from 0~128.
Mini Delay mode:On or Off. Select this mode on the output and input is simultaneously, without refresh rate
delay.
Under this mode, the image is under the best state.
Saturation：slide to adjust
Hue：slide to adjust
Color Temperature
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
√
√
flashes around the chosen port when it is clicked.
support@rgblink.com
|
www.rgblink.com
23 / 46
Advertisement
Table of Contents
