RGBlink Flexpro 8 User Manual page 20
Hide thumbs
Also See for Flexpro 8:
- User manual (65 pages) ,
- Quick start manual (50 pages) ,
- Quick start manual (46 pages)
Table of Contents
Advertisement
After one of the device is chosen, the device on the topology diagram shows the SN and IP
address of the chosen one.
2.2 In and Out port will show according to the topology diagram. For example topology diagram
as follow:
The chosen port of board of In and Out indicated by red dot as below:
Felxpro 8
User Manual
19
Advertisement
Table of Contents
