Input And Output Settings; Connect The Device - RGBlink Flexpro 8 User Manual
Hide thumbs
Also See for Flexpro 8:
- User manual (65 pages) ,
- Quick start manual (50 pages) ,
- Quick start manual (46 pages)
Table of Contents
Advertisement
3.2.3 Input and Output Settings
Connect the Device
After Topology Diagram is finished, users can move to next step, the exact setting on each input
and output board.
Click icon
and enter the operation interface.
First, choose the device from All Devices for example Flexpro 8 SN:ffff
Then click icon
behind Flexpro 8 in Chosen Device,IP and SN of this device is shown on the
left top corner of the interface
,which indicates that the device is connected to the
computer and it can be operated by XPOSE 2.0 from now on.
Felxpro 8
User Manual
22
Advertisement
Table of Contents
