Labels - Guardian Fall Protection Beamer 2000 Instruction Manual

Labels

Beamer Trolley Anchor
Part #: 00215
DOM:
Prior to use, read and understand
all manufacturer's instructions provided
with equipment at time of shipment
Compliant with ANSI Z359.18-17,
ANSI A10.32-12, OSHA 1910,
and OSHA 1926 Subpart M.
Type A anchorage connector.
Material: Aluminum, stainless
steel, and powder-coated steel.
Worker capacity: 130-420 lbs.
(including all equipment).
Maximum 1 connection.
5,000 lb. MBS (minimum breaking strength).
Avoid contact with hazards, including,
but not limited to, heat, electricity,
chemicals, and sharp or abrasive
edges and surfaces.
Minimum service temperature: -30º F.
MAKE ONLY COMPATIBLE CONNECTIONS.
FOR USE ON STRUCTURAL STEEL I AND H
BEAMS ONLY. NEVER INSTALL ON
TAPERED OR SLOPED BEAMS.
7
Serial #:
MO
INSPECTION GRID
User must inspect prior to EACH use.
Competent Person must complete formal
inspection every 6 months. Competent
Person to inspect and initial.
Date of First Use:
________________
Product lifetime is indefinite as long
as equipment passes pre-use and
Competent Person inspections.
YR 20__ 20__ 20__ 20__
J
F
M
A
M
J
J
A
S
O
N
D
If equipment fails inspection,
IMMEDIATELY REMOVE FROM SERVICE
90083 (Rev. D) / Made in China
DO NOT REMOVE LABELS
20__
85096 (Rev. F)